Table of Contents
Advertisement
signal strength. Setting AP Density to Low will cause the radio to wait until the signal
strength is significantly low before attempting to connect to another Access Point.
Depending on your site configuration – for example, the shelving, the Access Point cover-
age, etc. – a higher setting may improve through-put, increase and maintain signal strength,
and reduce missed transmissions.
Radio Power Management
When this option is enabled, access points that support it will use Radio Power Management
guidelines to control the client (NEO) radio. Access points determine how often the NEO
radio enters sleep mode when no activity is detected to reduce power consumption on the
client side. Another benefit is that when Radio Power Management is enabled, even when
no activity is detected, the access point does not disassociate the NEO (client).
5.10.2 User
5.10.2.1 Internet Explorer Settings
This option allows you to customize how your Internet Explorer is displayed and how the
tabbing functions.
These Internet Explorer options are designed to make it easier to view and navigate web
pages displayed on NEO.
Directional Tabbing, Fit-to-Screen and Focus Rectangle
When Directional Tabbing is enabled, arrow keys can be used to navigate to various links,
text boxes and so on around the page rather than limiting you to the [TAB] key. Fit-to-
Screen reformats the web page on the NEO screen into a single column, eliminating the
Psion Teklogix NEO Hand-Held Computer User Manual
Chapter 5: Configuration
User
129
Advertisement
Table of Contents
Troubleshooting
