Psion Teklogix PX750 User Manual page 264

Appendix D: Teklogix Imagers Applet
Code 49
Enabled
Set this parameter to on to enable "Code 16K".
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths – 1 to 160.
D.5.26 Code 49
The "Code 49" bar code is a multiple-row bar code that can encode the full ASCII character
set below ASCII 128. Up to 49 alphanumeric characters or 81 numeric characters can be
encoded into two to eight rows. Each row is divided by a separator bar. The top and bottom
of the symbol also have separator bars that extend to the ends of the minimum quiet zones.
Enabled
Set this parameter to on to enable "Code 49".
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths – 1 to 81.
D.5.27 Codablock
Enable
Set this parameter to on to enable "Codablock".
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths – 1 to 2048.
D.5.28 2D Data Matrix
Enable
Set this parameter to on to enable "2D Data Matrix".
D-32 Psion Teklogix NEO Hand-Held Computer User Manual