Table of Contents
Advertisement
Refresh Name repeats the device name inquiry, updating the name. This command is useful
if a device is listed without a name (unknown), or if a device name has been changed
remotely.
Delete removes this device from the list.
5.6.2.4 Pairing a Device
To pair devices:
•
Follow the manufacturer's instructions to place the remote device in pairing mode.
•
Choose the Devices tab and Scan for devices in your area.
•
When the scan is complete, tap on the device to which you want to pair.
•
In the pop-up Device menu, tap on Pair.
An Authentication dialog box is displayed.
•
If the remote device has authentication enabled, type the PIN in this dialog box.
•
To proceed without authentication, tap on Next.
Note: If a remote device has authentication enabled and you've skipped the authentication
process, a pop-up screen will ask if you want to allow the remote device to connect to
NEO. Tap on Yes and type the PIN. When authentication is complete, tap on Done.
Psion Teklogix NEO Hand-Held Computer User Manual
Chapter 5: Configuration
Device Tab
107
Advertisement
Table of Contents
Troubleshooting
