Table of Contents
Advertisement
Appendix D: Teklogix Imagers Applet
Removing a Custom Preset
•
Tap on OK to exit to the preset list and save the changes.
D.4.6
Removing a Custom Preset
•
Highlight the custom preset you want to delete, and tap on the Remove button.
A window is displayed warning you that you are about to remove a preset.
•
Tap on Yes to remove the preset or No to cancel the operation.
D.4.7
Configuring the Bar Code Decoding Symbologies
To configure the bar code decoding camera presets:
•
Tap on Start>Settings>Control Panel>Teklogix Imagers.
•
Tap on the Barcoding tab.
Figure D.3 Viewing Bar Code Decoding Symbologies
D-12
Psion Teklogix NEO Hand-Held Computer User Manual
Advertisement
Table of Contents
Troubleshooting
