Table of Contents
Advertisement
Appendix D: Teklogix Imagers Applet
Code 11
D.5.13 Code 11
Enabled
Set this parameter to on to enable "Code 11".
Check Digits
Double-tapping on this parameter displays a dialog box in which you can choose One Check
Digit or Two check digits.
If this parameter is set to One Check Digit, it is assumed that the last digit is a check digit. If
it is set to Two Check Digits, it is assumed that the last two digits are check digits.
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths – 1 to 80.
D.5.14 Interleaved 2 of 5
Enabled
Set this parameter to on to enable "Interleaved 2 of 5".
Check Char
When this parameter is set to on, the integrity of a "Interleaved 2 of 5" symbol is checked to
ensure that it complies with specified algorithms.
Check Char Strip
If you enable this parameter, a check character is stripped from the decoded bar code data.
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths – 2 to 80.
D.5.15 Matrix 2 of 5
Enabled
Set this parameter to on to enable "Matrix 2 of 5".
D-28
Psion Teklogix NEO Hand-Held Computer User Manual
Advertisement
Table of Contents
Troubleshooting
