Removing A Custom Preset; Configuring The Bar Code Decoding Symbologies - Psion Teklogix 7535 G2 User Manual

• For a parameter that can take a range of values:
- Highlight the parameter, and then press the [SPACE] key or double-click the
parameter.
- An associated dialog box containing the valid range of values for the parameter and
the current setting like the sample screen following is displayed.
- Type a value in the field provided.
• For a parameter that toggles between two values such as on or off and enabled or
disabled:
- Highlight the parameter and then press the [SPACE] key, or double-click on the
parameter. Either method toggles between the two available values.
• When you've completed your edits, tap on OK.
The parameter list is displayed; the new value for the changed parameter is shown.
• Tap on OK to exit to the preset list and save the changes.
D.4.6

Removing A Custom Preset

• Highlight the custom preset you want to delete, and tap on the Remove button.
A window is displayed warning you that you are about to remove a preset.
• Tap on Yes to remove the preset or No to cancel the operation.
D.4.7

Configuring The Bar Code Decoding Symbologies

To configure the bar code decoding camera presets:
• Tap on Start>Settings>Control Panel>Teklogix Imagers.
• Tap on the Barcoding tab.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet

Removing A Custom Preset

D-13