Psion Teklogix PX750 User Manual page 234

Appendix D: Teklogix Imagers Applet
Predefined Presets
• Imaging for photo capture.
• Imaging for bar code decoding.
• Symbology selection.
At any time, only one preset of each type can be designated as the user-selected
active preset.
D.2.1 Predefined Presets
Predefined presets are built into the imaging software and cannot be changed. The pre-
defined presets allow you to use the imager to perform specified tasks without having to
understand and set numerous variables. In almost all cases these predefined presets
are sufficient.
D.2.2 Bar Code Predefined Presets
These presets encompass the majority of the most popular bar codes and their subtypes. The
bar code decoding symbology predefined presets define which bar codes can be decoded.
The bar code decoding camera predefined presets determine how the bar code images
are captured.
D.2.2.1 Bar Code Decoding Symbology Predefined Presets
The following presets select groups of similar bar codes for decoding.
Note: It is recommended that the default preset be used whenever possible.
Factory Default
This preset enables the decoding of frequently used bar codes.
My Default
This preset uses the Symbology Settings menu to define the preset. For details about the
Symbology Settings menu, refer to "Bar Coding Tab – Configuring Symbologies" on page
D-15.
All
This preset enables the decoding of all bar codes that the imager can decode.
Linear
This preset enables the decoding of all the 1D symbologies that the imager can decode.
D-2 Psion Teklogix NEO Hand-Held Computer User Manual