Port Numbering; Attaching The Vertical Cable Management Finger Assemblies To The Cabinet Rails - IBM SAN384B-2 Installation, Service And User Manual

Port numbering

|
|
Figure 15. Attaching the vertical cable management finger assemblies to the cabinet rails
15. Disassemble and pack the lift tool into the shipping crate. Follow the return
instructions provided.
Note: For turning on the power and for the configuration instructions, see
Chapter 3, "Starting and configuring the SAN384B-2," on page 33.
Attention: Do not connect the SAN384B-2 to the network until the IP addresses
are correctly set.
Table 6 provides a list of available port and application blades for the SAN384B-2.
Table 6. Port and application blades available on the SAN384B-2
Blade label IBM blade name
FC16-32 32 port 16Gbps Switch Blade
FC8-32E 32 port 8Gbps Enhanced Port Blade
FC16-48 48 port 16Gbps Switch Blade
FC8-48E 48 port 8Gbps Enhanced Port Blade
FC8-64 64 port 8Gbps Switch Blade
FX8-24 FCIP 8 Gbps extension blade
Feature code
3632
3633
3648
3649
3864
3890
Chapter 2. Installing a SAN384B-2 in a cabinet
29