Tiredness Detection (Break Recommenda- Tion) - Seat ibiza Owner's Manual

Manually deactivating the Start-Stop func-
tion
›››
Press the Fig. 174 button located on
–

the centre console. When the Start-Stop
function is switched off, the warning lamp
comes on.
If the Start-Stop function is operating then
–
the engine starts immediately.
Switching the Start-Stop function on manual-
ly
›››
Press the Fig. 174 button located on
–

the centre console. The warning lamp will
switch off.
Tiredness detection (break rec-
ommendation)*
Introduction
›››

table on page 2
The Tiredness detection informs the driver
when their driving behaviour shows signs of
fatigue.
WARNING
Do not let the comfort afforded by the Tired-
ness detection system tempt you into taking
any risks when driving. Take regular breaks,
Driver assistance systems
sufficient in length when making long jour-
neys.
● The driver always assumes the responsibil-
ity of driving to their full capacity.
Never drive if you are tired.
●
● The system does not detect the tiredness of
the driver in all circumstances. Consult the in-
›››
formation in the section page 176, System
limitations.
In some situations, the system may incor-
●
rectly interpret an intended driving manoeu-
vre as driver tiredness.
No warning is given in the event of the ef-
●
fect called microsleep!
● Please observe the indications on the in-
strument panel and act as is necessary.
Note
Tiredness detection has been developed for
●
driving on motorways and well paved roads
only.
If there is a fault in the system, have it
●
checked by a specialised workshop.
Function and operation
Fig. 175 On the instrument panel display:
tiredness detection symbol.
Tiredness detection determines the driving
behaviour of the driver when starting a jour-
ney, making a calculation of tiredness. This is
constantly compared with the current driving
behaviour. If the system detects that the driv-
er is tired, an audible warning is given with a
sound and an optic warning is shown with a
symbol and complementary message on the
›››
Fig.
instrument panel display
message on the instrument panel display is
shown for approximately 5 seconds, and de-
pending on the case, is repeated. The system
stores the last message displayed.
The message on the instrument panel display
can be switched off by pressing the
button on the windscreen wiper lever or the
button on the multi function steering

›››

wheel page 25.
175. The

»
175