Seat ibiza Owner's Manual page 198

Hide thumbs Also See for ibiza:
Table of Contents

Advertisement

WARNING
Never wash tyres with a cylindrical jet. Even
at large spraying distances and short clean-
ing times, damage can occur to the tyres.
This may cause an accident.
Water, ice and salt on the brake system can
reduce braking effectiveness. Risk of acci-
dent. Directly after washing, avoid sudden
and sharp braking. "Dry" the brakes by brak-
›››
ing several times
page 156, Braking ca-
pacity and braking
distance.
Alloy wheel rims
Every two weeks
Wash salt and brake dust from alloy
wheels.
Use an acid free detergent to clean the
wheel rims.
Every 3 months
Apply a hard wax compound to the wheels.
Alloy wheels require regular attention to pre-
serve their appearance. If road salt and brake
dust are not often removed, the aluminium
finish will be impaired.
Always use an acid-free detergent for alloy
wheel rims.
Car polish or other abrasive agents should
not be used for maintaining the rims. If the
196
Advice
protective coating is damaged, e.g. by flying
stones, the damaged area should be re-
paired immediately.
WARNING
›››
Observe the safety warnings
wheel rims on page
196.
Vehicle underbody protection
The vehicle underbody is coated to protect it
from chemical and mechanical damage.
The protective coating can be damaged when
driving. We recommend that you check the
protective coating under the body and on the
running gear, and retouch it if necessary, be-
fore and after the winter season.
We recommend that you go to your Technical
Service to carry out repair work and addition-
al anti-corrosion work.
WARNING
Do not apply underseal or anti-corrosion
coatings to the exhaust pipes, catalytic con-
verter or the heat shields on the exhaust sys-
tem. The heat of the exhaust system or the
engine could cause them to ignite. Risk of
fire.
Cleaning engine compartment
Take special care when cleaning the engine
compartment.
Anti-corrosion treatment
in Steel
The engine compartment and the surface of
the power unit are given anti-corrosion treat-
ment at the factory.
Good corrosion protection is particularly im-
portant in winter when the vehicle is fre-
quently driven on salted roads. To prevent
the salt corroding the vehicle, the entire en-
gine compartment should be thoroughly
cleaned before and after winter.
Technical Services have the proper products
for cleaning and preservation as well as the
necessary workshop equipment. For this rea-
son, we recommend having this work per-
formed by them.
The anti-corrosion protection is usually re-
moved if the engine compartment is cleaned
with grease removing solutions, or if you
have the engine cleaned. On commissioning
this work, ensure that all surfaces, seams,
joints and components in the engine com-
partment are given anti-corrosion treatment.
WARNING
When working in the engine compartment,
always observe the safety warnings
›››
page
201.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents