Information On Fuel Consumption - Seat ibiza Owner's Manual

Vehicles for certain export countries do not
have an identification plate.
Identification plate
The identification plate is located on the right
rib inside the engine compartment.
Vehicle data sticker
The data sticker is placed on the inside of the
spare wheel well, in the boot and on the rear
cover of the Maintenance Programme.
The following information is provided on the
›››
Fig. 191
vehicle data sticker:
Vehicle identification number (chassis
1
number)
Vehicle type, model, capacity, engine
2
type, finish, engine power and gearbox
type
Engine code, gearbox code, external
3
paint code and internal equipment code
Optional extras and PR numbers
4
Consumption (l/100 km) and CO
5
sions (g/km)
Urban cycle consumption
A
Out-of-town consumption
B
Combined consumption and CO
C
emissions
218
Technical data
Chassis number
The vehicle identification number can be
read from outside the vehicle through a view-
er in the windscreen
located near the lower corner of the wind-
screen. The chassis number is printed on the
right water drain channel. The water drain
channel is located between the suspension
turret and the fender. To access the chassis
number, open the bonnet
Information on fuel consump-
tion
Fuel consumption and CO
The consumption and emission details
shown on the vehicle data sticker differ from
one vehicle to another.
Vehicle fuel consumption and CO
appear on the vehicle data sticker in the
spare wheel well, inside the boot and on the
emis-
2
rear cover of the Maintenance Programme.
The fuel consumption and CO
ues refer to the weight category assigned to
your vehicle according to the engine and
gearbox combination, as well as the specific
2
equipment fitted, and is only used to com-
pare between the different models.
The fuel consumption and CO
not depend only on the performance of the
vehicle, they can also differ from the estab-
lished values depending on other factors
›››
Fig. 192. The viewer is
such as driving style, road conditions, traffic
conditions, environmental conditions, load
and number of passengers.
Calculation of fuel consumption
›››
page 201.
The consumption values have been calcula-
ted based on measurements performed or
supervised by certified CE laboratories ac-
cording to the latest version of directives
715/2007/EC and 80/1268/CEE (for more in-
formation consult the European Union Publi-
cations Office at EUR-Lex: © European Union,
http://eur-lex.europa.eu/en/index.htm) and
emissions
2
are valid for the kerb weight indicated for the
vehicle.
In practice, and considering all the factors
emissions
2
mentioned here, consumption values can dif-
fer from those calculated in the current Euro-
pean regulations.
emission val-
2
Weights
Kerb weight refers to the basic model with a
fuel tank filled to 90% capacity and without
optional extras. The figure quoted includes
75 kg to allow for the weight of the driver.
emissions do
2
Note