Folding down the back seat
Fig. 143
Folding up the rear seat cushion.
Fig. 144
Button for unlocking the rear back-
rest.
Folding seat down
›››
Remove the head restraint
–
Pull the front edge of the seat cushion
–
›››
Fig. 143
upwards in the direction of
1
the arrow.
Seats and head restraints
Lift the cushion
–
tion of the arrow.
Pull the release button
–
rection of the arrow and fold the backrest
forwards.
Insert the head restraints in the spaces on
–
the rear of the seat cushion which are visi-
ble when the seat cushion is lowered.
Folding seat forward
Remove the head restraints from the
–
spaces in the seat cushion.
Lift the backrest, and before securing it, re-
–
place the head restraints in the seat cush-
ion, and then click the seat correctly onto
the locking rails.
Once the backrest is locked, pull on the
–
central seat belt or directly on the backrest
to check that the backrest has properly en-
gaged in position.
Check that the position lever is in neutral
–
position.
Lower the cushion and push it backwards
–
below the seat belt buckles.
Press the front part of the cushion down-
–
wards.
page
133.
On split rear seats*, the backrest and cush-
ion can be lowered and raised respectively in
two sections.
forwards in the direc-
2
›››
Fig. 144
in the di-
WARNING
●
Please be careful when folding back the
backrest! Injuries can be caused if the seat
height is adjusted without due care and at-
tention.
Do no trap or damage seat belts when rais-
●
ing the backrest.
●
After raising the backrest, check it has en-
gaged properly in position. Do this by pulling
on the central seat belt or directly on the
backrest and check that the position lever is
in the neutral position.
●
The three point automatic seat belt only
works correctly when the backrest of the cen-
tral seat is correctly engaged.
135