Side light and main beam
Fig. 97
Double headlight.
Side light and main beam headlights.
Fig. 98
Remove the cover
Raise the bonnet.
–
Move the loop
in the direction of the ar-
–
1
row and remove the cover
86
Changing the side light
Remove connector
–
outward.
Remove the bulb by pulling it out and fit-
–
ting the new one.
Installation involves all of the above steps
–
in reverse sequence.
Fit the cover and close the strap. Make sure
–
that the gasket sits well on the casing cover
during the operation.
Check whether the new bulb is working.
–
Changing the main beam bulb
Remove connector
–
outward.
Extract the bulb and fit the replacement so
–
that it sits correctly into the cut-out on the
reflector.
Installation involves all of the above steps
–
in reverse sequence.
Fit the cover and close the strap. Make sure
–
that the gasket sits well on the casing cover
during the operation.
Check whether the new bulb is working.
–
›››
Fig.
97.
Emergencies
›››
Fig. 98
by pulling
2
›››
Fig. 98
by pulling
3
Dipped beam headlight
Fig. 99
Double headlight.
Fig. 100
Dipped beam headlights.
Raise the bonnet.
–
›››
Move the loop
Fig. 99
in the direction
–
1
of the arrow and remove the cover.
›››
Remove connector
Fig. 100
–
bulb.
from the
2