Seat ibiza Owner's Manual page 92

● Remove the bulb holder, separating it from
the casing. To do this, press tabs
›››
direction of the arrows
● When the bulb holder has been removed,
press in the direction of the arrow
the same time, turn in the direction of the ar-
›››
row Fig. 110
2
Changing bulbs. LED lamps
Carry out the same operations as in lights fit-
ted with bulbs.
If necessary, remove the socket, as if it were
a bulb.
If the brake light and/or side light with LEDs
have to be replaced, the tail light must be re-
placed.
90
Changing the tail light bulbs (on the
in the
B side panel)
Fig. 109.
3 Applies to the model: IBIZA ST
and at
1
Fig. 111
Fig. 112
Accessing the side light bulbs
● Open the rear lid.
● Look for a lid with a grill behind the side
lights.
Emergencies
Lights on the side.
Removing the bulb holder.
● Remove the lid with a flat screwdriver, plac-
›››
ing it in notch Fig. 111.
A
Changing bulbs
Remove the bulb holder by pressing the
●
›››
fastening clip Fig. 112 and pulling it
B
outwards.
● Replace the faulty bulb, rotating it to the
left and outwards.
● To refit follow the steps in reverse order,
taking special care when fitting the bulb
holder.
Changing bulbs. LED lamps
Carry out the same operations as in lights fit-
ted with bulbs.
If necessary, remove the socket, as if it were
a bulb.
If the brake light and/or side light with LEDs
have to be replaced, the tail light must be re-
placed.