Seat ibiza Owner's Manual page 32

Menu Function
Display and storage of the values for
the journey and the consumption from
when the ignition is switched on to
when it is switched off.
If the journey is continued in less than
MFD from
2 hours after the ignition is switched
departure
off, the new data is added to the data
already stored in the memory. The
memory will automatically be deleted if
the journey is interrupted for more than
2 hours.
Display and storage of the values for
the journey and the consumption. By
MFD from
refuelling refuelling, the memory will be erased
automatically.
The memory records the values for a
specific number of partial trips, up to a
total of 19 hours and 59 minutes or 99
MFD total hours and 59 minutes, or 1999.9 km or
9999 km, depending on the model of
calcula-
instrument panel. On reaching either of
tion
a)
these limits
cally erased and starts to count from 0
again.
a)
It varies according to the instrument panel version.
Erasing a memory manually
● Select the memory that you wish to erase.
● Hold the button of the multifunction

steering wheel or the

function wheel pressed down for about 2 sec-
onds.
30
Personalising the displays
In the Easy Connect system you can adjust
which of the possible displays of the MFD can
be shown on the instrument panel display
with the button
Setup
Data summary
Menu
Current fuel
consumption
Average fuel
, the memory is automati-
consumption
Operating
range
button of the multi-
The essentials
and the function button

›››

page 107.
Function
The current fuel consumption dis-
play operates throughout the jour-
ney, in litres/100 km; and with the
engine running and the vehicle
stopped, in litres/hour.
After turning on the ignition, aver-
age fuel consumption in li-
tres/100 km will be displayed after
travelling about 100 metres. Other-
wise horizontal lines are displayed.
The value shown is updated approxi-
mately every 5 seconds.
®
ACT *: Depending on the equip-
ment, number of active cylinders.
Approximate distance in km that can
still be travelled with the fuel re-
maining in the tank, assuming the
same style of driving is maintained.
This is calculated using the current
fuel consumption.
Menu Function
This indicates the hours (h) and mi-
Journey du-
nutes (min) since the ignition was
ration
switched on.
Distance Distance covered in km (m) after
covered switching on the ignition.
The average speed will be shown af-
ter a distance of about 100 metres
Average has been travelled. Otherwise hori-
speed zontal lines are displayed. The value
shown is updated approximately ev-
ery 5 seconds.
Digital dis-
Current speed displayed in digital
play of
format.
speed
If the stored speed is exceeded (be-
Speed warn-
tween 30 - 250 km/h, or 19 -
ing at ---
km/h or Speed 155 mph), an audible warning is
warning at given together with a visual warn-
--- mph ing.
Oil tempera- Updated engine oil temperature dig-
ture ital display
Coolant tem-
Digital display of the current temper-
perature
ature of the liquid coolant.
gauge
Storing a speed with the speed warning
● Select the display Speed warning at
--- km/h (--- mph)