›››
Unclip the retainer spring
Fig. 100
–
pressing inwards to the right.
Extract the bulb and fit the replacement so
–
that the lug on the base fits into the recess
on the reflector.
Fit the connector.
–
Fit the cover and close the strap. Make sure
–
that the gasket sits well on the casing cover
during the operation.
Check whether the new bulb is working.
–
Turn signal light
Turn signal light.
Fig. 101
Raise the bonnet.
–
›››
Turn the bulb holder
Fig. 101
–
left and pull.
Fuses and bulbs
Remove the bulb by pressing on the bulb
3
–
holder and turning it anti-clockwise at the
same time.
Installation involves all of the above steps
–
in reverse sequence.
Changing the AFS headlight
bulbs
Position of the bulbs
AFS headlight bulbs.
Fig. 102
Turn signal
A
Xenon headlight (dipped beam/main
B
beam)
to the
1
Changing the xenon bulb
The procedure for changing the bulb is the
same on both sides of the vehicle.
WARNING
This type of bulb should be changed at a spe-
cialised workshop.
Turn signal bulb
Turn signal light.
Fig. 103
Raise the bonnet.
–
›››
Turn bulb holder
Fig. 103
–
and pull.
Remove the bulb by pressing on the bulb
–
holder and turning it anti-clockwise at the
same time.
Installation involves all of the above steps
–
in reverse sequence.
to the left
A
87