Rheavendors Group XS Instant Installation And Maintenance Manual page 41

By pressing button 2 the following message
habil escrow
0=habil.
is displayed. Press buttons 4 and 5 and modify the values of the function displayed. If this value is
programmed at 0 it is possible to insert money and then press the button of the return change without
making any selection; if this value is programmed at 1 a selection must absolutely be pressed after that
the money has been put inside the machine (this to prevent that the Vending Machine could be used like
a change money machine).
By pressing button 2 the following message
MAX CREDIT
is displayed. Press buttons 4 and 5 and modify the values of the function displayed. This parameter
indicates the maximum value of credit accepted by the machine. When the maximum credit limit is
overcome, the machine will accept no other payment. Leave this parameter set to 0 if no limitation is
required.
By pressing button 2 the following message
MAX REST
is displayed. Press buttons 4 and 5 and modify the values of the function displayed. This parameter
indicates the maximum value of change dispensed by the token machine (only with system for change).
Leave this parameter set to 0 if no limitation is required.
By pressing button 2 the following message
Type sell
0 = sing. 1 = mult.
is displayed. Press buttons 4 and 5 and modify the values of the function displayed. Another
characteristic of the MDB/ICP machine with system for change is the multi-sale function. This means
that, instead of giving back the correct change and end vend cycle, as usually provided for, the machine
keeps the possible residual credit available for the next selection. In order to have the change back, the
customer must press the button for coin ejection. This function is available when this parameter is set at
1.
ATTENTION: for mixed MDB/ICP systems, with system for change or card reader or credit key, it is
advisable to activate the multi-sale mode. Transfer of credit to card or key (if present) will be carried out
only when the button for the coin ejection is pressed.
By pressing button 2 the following message
TOKEN VALUE
1=dis. X
XXXXX
XXXXX
X
X
41 MAN1100105 V. 9 – 09/11/2011