Rheavendors Group XS Instant Installation And Maintenance Manual page 40

N TESTS
This value indicates the number of beverages in the selection test mode (free-vend: see "Pre-setting of
normal sale prices").
Finally, partial counters are available for each sale price. By pressing button 2 several times, the values
from
TOTAL SEL 1
to
TOTAL SEL 8
appear which indicate the total of beverages supplied for each button.
The Data Audit can be done also using Rhea flash card and rheaction software. For further information
contact Rheavendors Services S.p.A. - Customer Service.
12.5.8 Special pre-settings for MDB/ICP standard systems
The MDB/ICP standard systems are commonly used in the machine after programming function "TYPE
COIN MECH" to value MDB (see above). Due to the characteristics of this system, mostly the machine
manages the credit. The following parameters must be programmed for the correct operation of the
MDB/ICP systems. To modify the pre-settings of this function, in the programming mode, press button 1
until the sub-menu:
PROGRAMMING
MDB
is displayed.
Press buttons 2 and 3 and chooses the functions, which requires to be altered. Press buttons 4 and 5
and modify the values of the function displayed. The first function is:
COINS EJECTIONS
Buttons 5 - 6 - 7 - 8
Some coin-mechanisms don't have internal buttons to empty tubes. In this modality when buttons 5, 6,
7 and 8 are pressed, a coin will be dispensed from the corresponding tube.
MAN1100105 V. 9 – 09/11/2011
XXXXXX
XXXXXXX
XXXXXX
40