Related Manuals for Rheavendors Group XX micro
Summary of Contents for Rheavendors Group XX micro
- Page 1 XX micro type: xx instant INSTALLATION AND MAINTENANCE MANUAL Translation of the original instructions MAN1890105 rel. 02 dated 08.03.2017 ___________________________________ www.rheavendors.com...
- Page 2 XX micro by preliminary before using the machine, carefully read this information that helps you safety behave properly and guarantee a safe use; information the following pages use the symbols listed here below, whose meaning is of attention: GENERAL; if the text is highlit by this symbol, it is recommended to pay special attention to the performance of the procedures described;...
- Page 3 XX micro by safety rules for using the vending machine pay special attention to the chapters and notes high lit by the symbols alert; strictly observe the rules concerning, in particular, operators’ and users’ safety; the vending machine may be used by children who are at least 8 years old...
- Page 4 XX micro by safety rules for using the vending machine the symbol means that it is forbidden to dispose of the equipment as urban waste and compulsory to provide for separate collection in order to prevent any potential effect on the environment and human health;...
- Page 5 XX micro by residual risks a residual risk is understood as a potential danger that can not be eliminated and it persists despite all precautions in use since it is related to the intrinsic features of the product and it also includes non- identifiable risks;...
- Page 6 XX micro by general guarantee these conditions regulate Rheavendors Industries S.p.A.’s conditions obligations with reference to guarantee and repair; any other term or condition, either verbal or written, is not applicable, including those in the purchaser’s purchase orders, if not explicitly accepted and signed by Rheavendors Industries S.p.A.;...
- Page 7 XX micro by declaration of Rheavendors Industries S.p.A. declares that this drink vending (*) = if complete with a conformity machine has been designed and manufactured in compliance with modem the following directives and safety standards: Directives: 2014/30/UE; 2006/42/EC; 2014/53/UE (*); 2011/65/EC (RoHS);...
-
Page 8: Table Of Contents
XX micro by table of contents legend page 09 introduction page 09 technical data page 10 configurations page 12 presentation page 13 preliminary actions page 20 connections page 21 first power on page 22 programming page 24 parameters page 29... -
Page 9: Legend
XX micro by legend some general instructions that may be of use for reference to this manual; 01.01. abbreviations and pictograms dispensing cycle of drinks based on instant products; machines with internal water tank; machines with external water supply; = mixer for mixing the instant product with water;... -
Page 10: Technical Data
XX micro by technical data 03.01. dimensions height: 520 mm width: 275 mm depth: 410 mm 03.02. mass 16 kg values and indications for standard machine anyway refer to serial number label data see 02.03. 03.03. supply water - connection by means of a solenoid valve with 3/8“ gas male face: - supply by a submersible pump: from 0.1 MPa to 0.8 Mpa... - Page 11 (see 09.05.); 03.17. notes the water and energy supply tolerance limits that can ensure a good and proper operation of the XX micro machine are: water: - total hardness: from 10 °f to 25 °f (*) - recommended conductivity: 400 μS @ 20 °C...
-
Page 12: Configurations
XX micro configurations, considering the vending machine releases and programmability; the principles of operation and information are anyway universal and applicable to all machines of the XX micro range; 04.03. accessories to complete and supplement the vending machines of the XX micro range, Rheavendors Industires S.p.A. -
Page 13: Presentation
XX micro by presentation 05.12. service key 05.13. flash key housing 05.12. door switch 05.14. water door 05.15. water tank 05.14. product canister 05.15. 05.05. closing baffle door lock 05.15. product slide 05.18. mixer motor 05.16. mixing bowl 05.17. nozzle support 05.06. - Page 14 XX micro by 05.20. product motor 05.21. powder aspirator drawers water outlets 05.18. mixer motor 05.06. waste water from the boiler POWER LED TEMPERATURE LED WATER LED OFF ALLARM LED the following is present in addition to the six leds corresponding to selection keys: - supply leds: to signal the mains voltage presence;...
- Page 15 05.03. label slot apply the label into the slot on the machine cover; 05.04. dispenser the XX micro vending machine has got a fixed drink dispenser on the cup support surface; 05.05. door lock the door is closed by means of a lock; the key is mapped and numbered for identification;...
- Page 16 XX micro by 05.13. flash key housing a connector that can accommodate the programming flash key (see 09.05) or reading/writing terminals (see 05.28.) is available in the right side of the cover; 05.14. water door in A machines, a door on the vending machine cover will enable you to access to the internal water tank and fill it in;...
- Page 17 XX micro by attention these components may be very hot even if the machine is off; 05.23. boiler boiler with active elements (heating element, thermal protections, temperature sensor, pumps) fastened to the cover; water outlet 2 water outlet 1 level probe...
- Page 18 XX micro by 05.26. software the software installed in XX micro can be subdivided into two different chapters called: - master: it is the software determining the machine cycles, the links between the functions, the order of execution of operations;...
- Page 19 XX micro by 05.28. programming terminals the XX micro vending machine is not complete with a display; to display and programme the machine data, such as configuration ones, use the external terminals necessary for these operations; these three terminals shall be connected in the connector in the right side of the cover (see 05.13.) when the machine is off;...
-
Page 20: Preliminary Actions
XX micro by preliminary actions 06.01. handling the vending machine may be transported, handled and positioned by skilled and trained personnel only; while handling, never overturn the machine; observe the orientation arrows on the package; attention handle the machine carefully to prevent the authorised personnel from being injured;... -
Page 21: Connections
XX micro by connections 07.01. water make sure that the water used to supply the vending machine has all proper features for human consumption; make sure that there is no sign of impurity and check the degree of hardness; if necessary, contact an analysis lab;... -
Page 22: First Power
XX micro by first power on 08.01. introduction after having unpacked the vending machine, arranged it firmly in the work place and connected, or supplied it (machine “A”, see 01.01., fill in the water tank through the door on the vending machine cover, see 05.14.), hydraulically and electrically, carry out... - Page 23 XX micro by 08.04. daily wash cycle to keep the dispensing circuits of drinks surely clean, it may be of use to perform a complete wash cycle whenever you power on the machine; arrange a cup beneath the nozzles; power off the vending machine; when the machine is off and the door closed, press selection keys "1"...
-
Page 24: Programming
XX micro by programming the vending machine is programmed by means of parameters considered standard for the specific configuration required; values forming the composition of recipes – written in the board memories – enable the user to dispense drinks without requiring the installer to set up special programmes;... - Page 25 XX micro by 09.01.m. product qty to check and enable product dispensing cycles; PROGRAMMING PRODUCT QTY 09.01.a. button from 1 press key “2” when the display shows “key n” to scroll the variables to 6 composing the function of that key;...
- Page 26 XX micro by - fan delay: to determine for how many minutes after the latest fan time dispensing cycle the powder suction fan will remain active; min. - beep time: beep time active at the end of each machine function;...
- Page 27 XX micro by 09.01.n. product qty each product motor can be assigned a time credit in seconds that product qty will be decreased at each dispensing cycle of that product; after [ 0.0] 170.0 having used up the credit, the selection key flash on and off whenever a request is made for that product;...
- Page 28 XX micro by 09.06. programming diagram 1. PROGR button n functionning product n start delay product n inhibited water time n start delay water n water flow temperature temperature boiler mixer N start delay mixer n miscellaneous machine code a...
-
Page 29: Parameters
XX micro software; if not otherwise specified, the numeric time values of devices are understood in tenths of a second (e.g. 27 corresponds to 2 seconds and 7 tenths);... - Page 30 XX micro by 10.02. limits the table is intended to list the minimum and maximum values you can assign to programmable variables; m.u. from product sec. 0 = no product; product start delay sec. 0 = no delay; water time sec.
-
Page 31: Solution Of Problems
XX micro by solution of problems some malfunctions produce an error message shown by the display of terminal MT1 or MT2-A or signalled by some leds that will specifically turn on (see page 30); some general information is supplied here below for these messages;... - Page 32 XX micro by MAN1890105 rel. 02 dated 08.03.2017 page no. 32 of 38 www.rheavendors.com tel: 0039 02 966 551 fax: 0039 02 96 55 086 e mail: rheavendors@rheavendors.com rheavendors group's sole property...
-
Page 33: Maintenance
XX micro by maintenance the XX micro vending machine requires no special maintenance procedure to do its job; however, if you provide for careful and frequent cleaning, this may help the machine keep its performance constant, prevent failures and ensure the high quality of dispensed drinks;... - Page 34 XX micro by 12.01. weekly power off the machine; detach the power supply cable and carefully make sure that there is no sign of wear; carefully check the stability and efficiency of the internal connections of the mains supply; external body use a non-abrasive piece of cloth after having dampened it with lukewarm water;...
- Page 35 XX micro by 12.04. out of order if the vending machine should be inactive for a long period, please act as follows: temporary - set the boiler water temperature to zero (see 09.01.b.); - detach the water and energy supply;...
-
Page 36: How To Do To
XX micro by how to do to: 13.01. empty the drip the drip tray is arranged in its work seat and retained by the see 05.06. tray notches in the structure; pull to remove it; 13.02. remove the rotate the dispensing slide closure and pull the canister by lifting it see 05.15. - Page 37 XX micro by 13.10. regulate the speed the rotation speed of the motors of product mixers can be adjusted see 09.01.a. of mixers between 15,000 r.p.m. (value 0) and 5,000 r.p.m. (value 5); the drink quality of instant products depends a lot upon the action of...
Need help?
Do you have a question about the XX micro and is the answer not in the manual?
Questions and answers