Rheavendors Group XS Instant Installation And Maintenance Manual page 28

FUNCTIONING
COLD
Scroll the functions pressing buttons 4 and 5.
To inhibit the button, which is going to be programmed, confirm INHIBITED pressing button 1.
Setting of a selection
To associate a selection to the button, which is going to be programmed, confirm FUNCTIONING.
Only for FP versions it is possible program cold drinks selecting the function FUNCTIONING COLD.
Press button 2. The display shows one of the following options:
PROGRAMMING:
TOTAL
PROGRAMMING:
PARTIAL
Use buttons 4 and 5 to visualise the options. Choose PROGRAMMING TOTAL if you want the
possibility to programme all the parameters of each product, otherwise choose PROGRAMMING
PARTIAL.
Pressing in sequence button 2 the display shows:
PRODUCT X
0=inhib.
The number of the product shows the position of the canister inside of the machine starting to count from
the left the possible positions of the product motors.
If the PRODUCT X is necessary for the drink that is being set, increase or decrease until the desired
value, pushing respectively buttons 4 and 5; otherwise inhibit the ingredient setting its value to 0.0.
Pressing again button 2 the display shows:
start delay
PRODUCT 1
Pressing respectively buttons 4 and 5 increase or decrease the ingredient's pouring delay after the
starting of the water associated to this product.
Pressing again button 2 the display shows the same items for other products that can be set as the
previous one following the recipe of the desired drink.
Pressing again button 2 the display shows:
WATER X time
MAN1100105 V. 9 – 09/11/2011
.0
.0
28