Programming Of The Machine - Rheavendors Group XS Instant Installation And Maintenance Manual

12 Programming of the machine

12.1 Memory
The machine is controlled by a programme stored in the
microprocessor of the FLASH memory, installed on the
CPU board in the back side of the machine.
The program stored in the memory can be updated with a
FLASH serial card or with a serial cable connected with a
PC where is installed the Rheaction Program.
As standard you will find inside the door a phone cable
where you have to connect a flash box (code
0020040238R) where to insert the flash card.
At the switching on of the machine a message will display
the latest version of the software loaded into the machine.
12.2 Factory set parameters
The machine is supplied already pre-set for the most common operation parameters. In particular:
- configuration of the version;
- throw of coffee, powdered ingredients, tea and quantity of water required;
- vend prices (set to 0: the machine is in the free vend mode);
MAN1100105 V. 9 – 09/11/2011 24