Rheavendors Group XS Instant Installation And Maintenance Manual page 34

PRICE X
XXXX
will appear on the display. Press buttons 4 and 5 to modify the value of the price displayed.
Press button 1 to confirm the set data.
When the invitation message is visualised and with machine open and switched on, the pre-set sale
prices can be by-passed by entering the selection test mode (free-vend). To have access to this mode,
press the key on the display board inside the machine, then press button 3.
The display shows:
1=PROG
3=FREE
2=DATA 4=CLEAN
5=MAINT.
FREE VEND
At this point the machine is able to dispense any selection, without charge. Selection sales in the
selection test mode are counted in a separate counter (see "Reading of sales data").
To exit from the selection test mode, press the key on the display board inside the machine.
12.5.3 Presetting of coin-set
The set of values that the machine assigns to each signal (canal) received from the payment system is
called coin-set.
Press button 1 until to visualize the sub-menu:
PROGRAMMING- - - - -
-COINS- - - - - - - - - - -
Pressing button 2 the display shows from:
COIN A
0
to:
COIN F
0
Pressing buttons 4 and 5 change the value of the visualised coin.
Press button 1, exit from the programming mode, and switch the machine off and on. The machine will
use the new coin-set.
For further information see the paragraph " Modifying other operation parameters (Miscellaneous)" the
parameter "single or multi vend".
MAN1100105 V. 9 – 09/11/2011 34