Rheavendors Group XS Instant Installation And Maintenance Manual page 37

To protect all the data set into the PROGRAMMING mode and the access to the free-vend modality, it is
possible to introduce a 3 digits secret code; the machine requests this code every time somebody tries to
enter into PROGRAMMING mode or FREE-VEND mode pressing the key on the display board inside
the machine and then buttons 1 or 3.
Pressing buttons 4 and 5 it is possible to set the secret code (from 111 to 888 with the exception of all
the numbers containing the digit 9; i.e. the machine accepts the code 123 but not the code 109). Exit
from Programming mode. Now when the key on the display board inside the machine is pressed if
somebody tries to press buttons 1 or 3 the display will show:
insert
access code
Using the selection keypad as a numerical keypad, insert the code that has been stored knowing that to
the selection button 1 corresponds the digit 1, to the selection button 2 corresponds the digit 2 and so
on. If the inserted code is wrong the machines come back automatically to vend mode. Normally the
machines come out from the factory without any code stored:
code:
INHIBITED
and so it is possible to go inside the Programming mode and in free-vend mode.
Pressing again button 2, the display shows:
fan time
min.
pressing buttons 4 and 5 it is possible to modify the value of the time range between the end of the
cycle of a drink and the switching off of the aspiration fan.
Pressing again button 2, the display shows:
time beep
Pressing buttons 4 and 5 it is possible to modify the value correspondent to the beep signal that
indicates the end of the distribution of the drink.
Pressing again button 2, the display shows:
decimal numbers:
Pressing buttons 4 and 5 it is possible to set the number of the decimal digits after comma according
with the values of the coins, which the machine has to accept (Es: 0=50, 1=5,0 2=0,50...).
Pressing again button 2, the display shows:
language
180
0.3
0
english
37 MAN1100105 V. 9 – 09/11/2011