Table of Contents
Advertisement
Disassemble the rear wall of the XS I - XS
I/LIONESS machine unscrewing the fixing
screws.
Fix it on the rear side of the
machine with the proper screws.
Cut the rear wall to make a hole
for Damian Piccola to connect
the communication cable. Install
again the rear wall of the XS I -
XS I/LIONESS vending machine.
10.4 Diagnostics cycle of the switching up
At the starting the machine carries out a diagnostics cycle to check the position of the mobile
components, the correct quantity of some ingredients and the correct water mains supply pressure.
At the end of checks, the standard invitation message will appear on the display, e.g.:
rheavendors group
- - - - - - - - - - - - - - -
version 2.4
24 - 04 - 03
the date of the update of the software and the version of the master loaded into the machine (e.g.: 2.2).
MAN1100105 V. 9 – 09/11/2011
Take the Damian Piccola interface
board and
Plug into the connectors of the CPU/POWER board of the
XS I - XS I/LIONESS machine the flat cable and the supply
connector from the Damian Piccola interface board.
16
Hide quick links:
Advertisement
Table of Contents
