Rheavendors Group XS Instant Installation And Maintenance Manual page 19

1=PROG
3=FREE
2=DATA 4=CLEAN
5=MAINT.
Press button 1. The display will show:
PROGRAMMING- - - -
-BUTTON 1 - - - - - - - -
Press again button 1 until the display shows:
PROGRAMMING - - -
TEMPERATURE - - -
Pressing button 2 the display shows:
TEMPERATURE
Boiler
Pressing button 4 and 5 set the correct value (the suggested values are 85°C for Instant machines and
92°C for Espresso machines).
Press button 1 to confirm the data and then the key inside the machine on the display board to exit from
PROGRAMMING.
Switch off and on the vending machine using the safety switch.
At the end of the operation the display will shows:
rheavendors
place
your cup
11.2 Second installation phase
The second phase of the installation of the machine contains the cleaning of the parts in contact with
foodstuff, the loading of the food products and the installation of some accessories.
11.2.1 Washing and disinfecting of components in contact
with foodstuff.
With the vending machine switched on, make sure that the display shows:
rheavendors
XS I
10
XS I
19 MAN1100105 V. 9 – 09/11/2011