Rheavendors Group XS Instant Installation And Maintenance Manual page 29

0=inhib.
The number of the WATER shows the position of the mixer starting from the left. Increase or decrease
the value pressing respectively the buttons 4 and 5; otherwise inhibit WATER setting its value to 0.0.
Pressing again button 2 the display shows:
start delay
WATER 1
Pressing buttons 4 and 5 increase or decrease respectively the water pouring delay after the beginning
of the selection.
Pressing again button 2 the display shows:
flow
slow
Pressing buttons 4 and 5 it is possible to choose among the three parameters "slow", "medium",
"quick" to increase or decrease the correspondent water flow.
Pressing again button 2 the display shows:
MIXER X
0=inhib.
Increase or decrease the value of the time of working of the mixer pressing respectively the button 4
and 5; otherwise inhibit the MIXER setting its value to 0.0.
Pressing again button 2 the display shows:
start delay
MIXER X
Pressing buttons 4 and 5 increase or decrease respectively the mixer start delay after the starting of the
water associated to this mixer.
Pressing again button 2 the display shows:
speed MIXER X
Pressing buttons 4 and 5 increase or decrease respectively the mixer speed of the selection. The
values go from 1 to 5. The maximum speed is set programming the value 1.
Pressing again button 2 the display shows:
selection name:
standard
Pressing button 4 and 5 it is possible to modify the message shown in the display during the preparation
of the drink. If you select the value standard, the display will show:
.0
.0
WATER X
.0
1.0
0
29 MAN1100105 V. 9 – 09/11/2011