12.5.4 Modification of the operating temperature
The machine defines and regulates water temperature in the boiler.
To modify the temperature thresholds, in the programming mode, press button 1 until the sub-menu
PROGRAMMING
TEMPERATURE
is displayed.
Pressing button 2 the display shows:
TEMPERATURE
Instant Boiler
Pressing button 4 and 5 set the value.
At the end of programming, press button 1 to confirm the set data.
12.5.5 Modifying
(miscellaneous)
To modify parameters, in the programming mode, press button 1 until the sub-menu
PROGRAMMING
MISCELLANEOUS
is visualised.
Pressing button 2, the display shows:
MACHINE CODE A
Pressing again button 2, the display shows:
MACHINE CODE B
Press buttons 4 and 5 to associate to each vending machine personal codes. These numbers are useful
only when a data audit system is used with the machines.
Pressing again button 2, the display shows:
MESSAGE NUMBER
Press buttons 4 and 5 the number of the stand by message to show on the display during the working of
the machine (from 0 to 7). Set the message number 3 only if a programmable message is been set with
the Rheaction programme with the PC.
Pressing again button 2, the display shows one of the following options (scroll the options pressing
buttons 4 and 5):
XXX
other
operation
0
0
0
parameters
35
MAN1100105 V. 9 – 09/11/2011