Blanking Adjustment - Barco barcoelm r18 Owner's Manual

To return to the default position, click on Reset.
Size adjustment
The size can be adjusted in a vertical or horizontal way.
The black screen indicates its initial position (image A-11). The size values are given in a text box below the resized image. To
return to the default position, click on Reset.
Vertical Size adjustment
When adjusting the vertical size, The upper side of the image is fixed (table and ceiling mounted configurations) and only the lower
side can be moved to its exact position. Therefore :
1. Click on the lower side of the image and drag it up or down until its correct position is obtained (steps of 8 pixels).
Or,
Click once on the size screen and use the ↑ or ↓ keys on the keyboard to resize the image (steps of 1 pixel).
Horizontal Size adjustment
When adjusting the horizontal size, the left side of the image is fixed and only the right side can be moved to its exact position.
Therefore:
1. Click on the right side of the image and drag it to the left or right until its correct position is obtained (steps of 8 pixels).
Or,
Click once on the size screen and use the ← or → keys on the keyboard to resize the image (steps of 1 pixel).
Keystone adjustment
Keystone adjustment can be changed by :
1. moving with the mouse the slide bar up or down
Or,
clicking on the up or down arrow on the edges of the slide bar.
A value indication for the setting will be given just below the slide bar of the keystone adjustment.
A.4.8 Blanking adjustment
What can be done
Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and
to hide or black out unwanted information (or noise).
The blanking values are given in a text box below the image. A '0' value in the text box indicates no blanking.
Image A-12

Blanking adjustment

R5976333 BARCOELM R18 17092002
Downloaded from ProjectorsManual.com Manuals
A. Barco Control Manager
115