Table of Contents
Advertisement
8. Installation Mode
The following items can be adjusted:
•
zoom/focus
•
shift
•
Options : same zoom/focus for all files, yes or no.
How to start up.
1. Push the cursor key ↑ or ↓ to highlight Lens. (menu 8-22)
2. Press ENTER to select.
The lens menu will be displayed. (menu 8-23)
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-22
How to Zoom/Focus ?
1. Push the cursor key ↑ or ↓ to select Zoom/Focus. (menu 8-24)
2. Push the cursor key ↑ or ↓ to zoom and ← or → to focus the image (see Quick Lens Adjustment, page 38).
3. When finished, press EXIT to return to the lens adjustment menu or press ENTER to go to the shift function.
LENS ADJUSTMENT
ZOOM/FOCUS
SHIFT
TILT
OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-24
How to shift the image?
1. When on the Zoom/Focus menu, press ENTER to switch to the shift menu or
2. When on the Lens Adjustment menu, Push the cursor key ↑ or ↓ to highlight Shift and press ENTER to display the shift menu.
(menu 8-25)
3. Push the cursor key ↑ or ↓ to shift the image up or down and ← or → to shift the image left or right.
4. When finished, press EXIT to go to the lens adjustment menu or press ENTER to go to the shift function.
LENS ADJUSTMENT
ZOOM/FOCUS
SHIFT
TILT
OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-25
82
Downloaded from ProjectorsManual.com Manuals
LENS ADJUSTMENT
ZOOM/FOCUS
SHIFT
TILT
OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-23
R5976333 BARCOELM R18 17092002
Advertisement
Table of Contents
