Table of Contents
Advertisement
7. Random Access Adjustment Mode
Size adjustment
1. Push the cursor key ↑ or ↓ to highlight Size. (menu 7-41)
2. Press ENTER to select.
3. Push the cursor key ↑ or ↓ to size the image in a vertical direction.
Push the cursor key ← or → to size the image in a horizontal direction.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPECT RATIO [4:3]
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-41
7.4.5
Side Keystone
What can be done?
The side keystone adjustment is used to align the image if the projector is mounted at a non standard projection angle.
Image 7-6
Side Keystone
Side keystone adjustment
1. Push the cursor key ↑ or ↓ to highlight Side Keystone. (menu 7-42)
2. Press ENTER to select.
3. Push the cursor key ← or → to adjust the keystone of the image.
When the upper part of the image is wider than the lower part of the image, push the cursor key ←. The number indication below
the bar scale will be negative.
When the upper part of the image is smaller than the lower part of the image, push the cursor key →. The number indication
below the bar scale will be positive.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPECT RATIO [4:3]
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-42
7.4.6
Blanking
What can be done ?
Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and
to hide or black out unwanted information (or noise). A '0' on the bar scale indicates no blanking.
64
Downloaded from ProjectorsManual.com Manuals
R5976333 BARCOELM R18 17092002
Advertisement
Table of Contents
