C Diagnoses; 3Formatter; 4Smps; How To Select - Barco barcoelm r18 Owner's Manual

9.14.2 I 2

C Diagnoses

How to select?

1. Push the cursor key ↑ or ↓ to highlight I2C. (menu 9-37)
2. Press ENTER to select.
The I2C Diagnosis overview will be displayed.
If the indication behind the hex code is green, everything is ok.
If the indication is red, something is wrong with that indicated address. (menu 9-38)
DIAGNOSIS
I2C
FORMATTER
SMPS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-37
9.14.3 Formatter
How to select the overview?
1. Push the cursor key ↑ or ↓ to highlight Formatter. (menu 9-39)
2. Press ENTER to select.
An overview of the working of the formatter will be displayed. (menu 9-40)
DIAGNOSIS
I2C
FORMATTER
SMPS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-39
9.14.4 SMPS
How to select the overview?
1. Push the cursor key ↑ or ↓ to highlight SMPS. (menu 9-41)
2. Press ENTER to select.
The SMPS overview menu will be displayed. (menu 9-42)
DIAGNOSIS
I2C
FORMATTER
SMPS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-41
R5976333 BARCOELM R18 17092002
Downloaded from ProjectorsManual.com Manuals
I2C DIAGNOSIS
DECODER 12H ###
MOTOR DRIVER 1AH ###
LIGHT SENSOR 1CH ###
LAMP DRIVER 20H ###
POWER SUPPLY 30H ###
FORMATTER 34H ###
PMP 4AH ###
INPUT SELECTOR 72H ###
INPUT SELECTOR 98H ###
INPUT SELECTOR 9AH ###
LAMP MODULE A0H ###
Select with ↑ or ↓
<EXIT> to return.
Menu 9-38
FORMATTER
I2C (34H) OK
TYPE SXGA
<EXIT> to return
Menu 9-40
SMPS
I2C (30H) OK
AMBIENT OK
NTC OK
TILT SWITCH OK
MICRO SWITCH OK
LAMP TEMP OK
LPS MAINS OK
POWER OK
<EXIT> to return
Menu 9-42
9. Service Mode
99