2Menu Position; Internal Patterns; Available Patterns - Barco barcoelm r18 Owner's Manual

8.11.2 Menu Position
How to change
1. Push the cursor key ↑ or ↓ to highlight OSD. (menu 8-33)
2. Press ENTER to select.
3. Push the cursor key ↑ or ↓ to highlight Menu Position. (menu 8-34)
4. Press ENTER to toggle between [DEFAULT] and [CENTER].
DEFAULT
CENTER
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD

INTERNAL PATTERNS

Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-33
8.12 Internal Patterns
What can be done with these internal patterns?
The projector is equipped with different internal patterns which can be used for measurement purposes.

Available patterns

- Outline
- Hatch
- Color bars
- Multiburst
- Checker board
- Page Char
- Alpha numeric char
How to select an internal patterns?
1. Push the cursor key ↑ or ↓ to highlight Internal Patterns. (menu 8-35)
2. Press ENTER to select.
The internal patterns menu will be displayed. (menu 8-36)
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-35
R5976333 BARCOELM R18 17092002
Downloaded from ProjectorsManual.com Manuals
menus displayed in the center, adjustment boxes displayed in the corner.
menus and adjustment boxes displayed in the center of the image.
OSD
HIGHLIGHT ITEM COLOR [red]
MENU POSITION [Default]
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-34
INTERNAL PATTERNS
OUTLINE
HATCH
COLOR BARS
MULTIBURST
CHECKER BOARD
PURITY
PAGE CHAR
ALPHA_NUMERIC CHARS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 8-36
8. Installation Mode
85