Table of Contents
Advertisement
How to tilt the image?
1. When on the shilft menu, press ENTER to switch to the tilt menu or
2. When on the Lens Adjustment menu, Push the cursor key ↑ or ↓ to highlight Tilt and press ENTER to display the tilt menu.
(menu 8-26)
3. Push the cursor key ↑ or ↓ to tilt the image.
4. When finished, press EXIT to go to the lens adjustment menu or press ENTER to go to the Zoom/Focus function.
LENS ADJUSTMENT
ZOOM/FOCUS
SHIFT
TILT
OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-26
Options
The zoom/focus and shift can be set the same for all files.
1. Push the cursor key ↑ or ↓ to highlight Options. (menu 8-27)
2. Press ENTER to select.
The Lens Options menu will be displayed. (menu 8-28)
3. Press ENTER to toggle between 'Yes' or 'No'.
[Yes]
[No]
LENS ADJUSTMENT
ZOOM/FOCUS
SHIFT
TILT
OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-27
When in the 'No' position, the lens memory is using incremental motors which have an accuracy of 1 to 2
steps. This has no implication for zoom, but focus might demand some fine-tuning when switching from one
source to another.
8.10 Quick Access Keys
What can be done?
It is possible to get an overview of the programmed functions of the different function keys (only accessible with an adapted RCU).
R5976333 BARCOELM R18 17092002
Downloaded from ProjectorsManual.com Manuals
all lens settings will be the same for all files
different lens settings will be the same for all files
Default setting : [No]
LENS OPTIONS
Use the same
zoom and focus
of the lens
for all files?
[No]
<ENTER> to toggle
<EXIT> to return.
Menu 8-28
8. Installation Mode
83
Advertisement
Table of Contents
