Configuration; Set Up The Correct Configuration; Lens Adjustment - Barco barcoelm r18 Owner's Manual

How to start up?
1. Push the cursor key ↑ or ↓ to highlight Convergence. (menu 8-19)
2. Press ENTER to select.
The following message will be displayed : "Convergence is reserved to qualified service personnel." (menu 8-20)
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE

CONFIGURATION

LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-19
8.8 Configuration
What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation configurations are possible:
• front/table
• front/ceiling
• rear/table
• rear/table

Set up the Correct Configuration

1. Push the cursor key ↑ or ↓ to highlight Configuration. (menu 8-21)
2. Press ENTER to select.
The configuration menu will be displayed.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-21
For more information, see Installation Guidelines .

8.9 Lens Adjustment

What can be done ?
All lens adjustments are motorized and can be adjusted with the RCU.
R5976333 BARCOELM R18 17092002
Downloaded from ProjectorsManual.com Manuals
WARNING
CONVERGENCE
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return
Menu 8-20
8. Installation Mode
81