Table of Contents
Advertisement
5. GETTING STARTED
5.1 RCU & Local keypad
How controlling the projector ?
The projector can be controlled by the local keypad or by the remote control unit.
Location of the local keypad ?
The local keypad is located on the input side of the projector.
Remote control functions.
This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the projector remotely. This
remote control is used for source selection, control, adaptation and set up. It includes automatic storing of picture controls (Bright-
ness, Sharpness...) and settings.
Other functions of the remote control are :
•
switching between stand by and operational mode.
•
switching to "pause" (blanked picture, full power for immediate restarting)
•
direct access to all connected sources.
5.2 Terminology overview
Overview
The following table gives an overview of the different functionalities of the keys.
Image 5-1
Local keypad & RCU
R5976333 BARCOELM R18 17092002
Downloaded from ProjectorsManual.com Manuals
5. Getting Started
35
Advertisement
Table of Contents
