Table of Contents
Advertisement
Slots are made in these profile sections for easy inserting the clamps and for easy adjusting the clamp position so that this position
matches with the rigging points.
Consult a professional structural engineer prior to suspending the ceiling mount from a structure not intended
for that use. Always ensure the working load limit of the structure supporting the projector. When mounting
the projector to the ceiling or to a rigging system, always mount security chains.
Fork lift Supports
A set of 4 fork lift supports are available to lift up the projector in an easy way. These supports are also provided with slot for inserting
rigging clamps.
To mount these supports, handle as follow :
1.
Turn the projector onto its input side.
2.
Slide the fork lift support (A) onto the provided socket (B).
3.
Turn in the four bolt for each socket.
Image 3-19
Mounting fork lift supports
R5976333 BARCOELM R18 17092002
Downloaded from ProjectorsManual.com Manuals
3. Installation Guidelines
23
Advertisement
Table of Contents
