Table of Contents
Advertisement
3. Installation Guidelines
6. Adjust the screw B (image 3-13)with an Allen key by turning a little clockwise until the maximum light output is reached (the
maximum value of the Z-AXIS indication on the lamp menu).
7. Fasten the nut on the back of the lamp casing to secure this position (nutdriver 10).
Image 3-13
3.8 Lenses
3.8.1
Lenses
Available lenses
QLD lenses
QLD (1.5-2.0:1)
QLD (2.0-2.5:1)
QLD (2.5-4.0:1)
QLD (4.0-7.0:1)
QLD (5.6-12.0:1)
QLD (1.2:1)
LD lenses
LD (0.8:1)
LD (1.5-2.5:1)
LD (2.5-4.0:1)
LD (4.0-7.0:1)
These lenses can only be used in combination with an adaptor ring.
18
Downloaded from ProjectorsManual.com Manuals
R9840130
R9840140
R9840150
R9840160
R9840430
R9840120
R9840420
R9840090
R9840270
R9840280
R5976333 BARCOELM R18 17092002
Advertisement
Table of Contents
