Table of Contents
Advertisement
8. Installation Mode
8.10.2 Menu Position
How to change
1. Push the cursor key
2. Press ENTER to select.
3. Push the cursor key
4. Press ENTER to toggle between [DEFAULT] and [CENTER].
DEFAULT
menus displayed in the center, adjustment boxes displayed in the corner.
CENTER
menus and adjustment boxes displayed in the center of the image.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with
or
then <ENTER>
<EXIT> to return
Menu 8-30
8.11 Internal Patterns
What can be done with these internal patterns?
The projector is equipped with different internal patterns which can be used for measurement purposes.
Available patterns
-
Outline
-
Hatch
-
Color bars
-
Multiburst
-
Checker board
-
Page Char
-
Alpha numeric char
How to select an internal patterns?
1. Push the cursor key
2. Press ENTER to select.
The internal patterns menu will be displayed. (menu 8-33)
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with
or
then <ENTER>
<EXIT> to return
Menu 8-32
88
to highlight OSD. (menu 8-30)
or
to highlight Menu Position. (menu 8-31)
or
OSD
HIGHLIGHT ITEM COLOR [red]
MENU POSITION [Default]
Select with
or
then <ENTER>
<EXIT> to return
Menu 8-31
to highlight Internal Patterns. (menu 8-32)
or
INTERNAL PATTERNS
OUTLINE
HATCH
COLOR BARS
MULTIBURST
CHECKER BOARD
PURITY
PAGE CHAR
ALPHA_NUMERIC CHARS
Select with
or
then <ENTER>
<EXIT> to return.
Menu 8-33
R5976483 BARCOSLM R6 17092002
Advertisement
Table of Contents
