Displaying The Cross Section Of Objects - Stratasys Objet24 User Manual

Displaying the
Cross Section
of Objects
DOC-34014 Rev. C
The Section feature enables you to view the interior of an object by "slicing"
it on any axis. You can then manipulate the object to inspect the interior
from different angles. This may be important for deciding on the type of
support necessary when producing the model (see "Choosing the Support
Strength" on page 41). Displaying an object's cross section only affects how
the tray is displayed on the screen; it does not change the object itself.
To display a cross section of the tray:
1. From the Tools menu, select
The Section dialog box opens.
Figure 5-58: Section dialog box
2. Select
Enable Clipping
3. Use the slider controls for the X‐, Y‐, and Z‐axes to cut the tray so that
you see the cross section you want.
Figure 5-59: Whole view
.
Section
.
Figure 5-60: Cross-section view, after
Objet24 User Guide
using the Z-slider
5–43