Printing
Indicators
Printer mode
Job information
Stop button
DOC-34014 Rev. C
The printer interface screen changes when you send a print job from Objet
Studio to the printer, and the printer is on line (see figure 6‐8):
•
The mode changes from Pre‐print to Printing.
•
The specific activity being performed is shown in the "current activity"
field.
•
Current job‐printing information is displayed.
•
The printing progress bar is displayed.
•
The Stop button is enabled.
Figure 6-8: Printer interface during printing
During printer operation, the following window may occasionally appear.
Figure 6-9: Q-Monitor
This window records information for service personnel only, and it does
not require your attention. You can close or minimize it to remove it from
view.
Objet24 User Guide
Current Activity
Job information
Progress bar
Alternating
pumping
Almost empty
6–9