Professional Mode Features - Stratasys Objet24 User Manual

Professional Mode Features

DOC-34014 Rev. C
Some advanced features of Objet Studio are only accessible in Professional
Mode.
To see the current Objet Studio setting:
Open the Tools menu.
Figure 5-72: Tools menu, showing Professional Mode selected
If Professional Mode is selected, advanced features are displayed.
To change the Professional Mode setting:
1. From the Tools menu, select
The following message is displayed, reminding you that the change
will only take effect the next time you open Objet Studio—even though
the check mark next to the Professional Mode option appears
immediately.
Figure 5-73: Configuration-change message
2. Close and re‐open Objet Studio to use the Professional Mode features.
Objet24 User Guide
.
Professional Mode
5–51