Measurement Units - Stratasys Objet24 User Manual

Using Objet Studio
Measurement
Units
5–24
3D files contain an objectʹs proportions, but not its units of measure.
Therefore, make sure to correctly select either millimeters or inches when
inserting an object. Otherwise, the size of the object on the build tray will be
either much too large or much too small.
To set the measurement units when inserting an object:
In the Insert dialog box, Units field, select
Figure 5-24: Units field in the Insert dialog box
To change measurement units for a selected object from the
Model Settings ribbon:
1. Open the Units flyout toolbar.
Figure 5-25: Units flyout toolbar
2. Select the measurement units desired.
To change measurement units for a selected object from the standard
toolbar:
1. From the Object menu, select
Figure 5-26: Model Units dialog box
2. In the Model Units dialog box, change the setting and click
or
Millimeter
.
Change Units
:
Inch
.
OK
DOC-34014 Rev. C