Safety
Safety Guidelines
Printer
Installation
Printer
Operation
UV Radiation
Printer
Maintenance
2–4
The following general guidelines, together with the instructions provided
throughout this user guide, ensure user safety while operating and
maintaining the system. If the system is not operated as specified, the
userʹs safety may be compromised.
Installation and removal of the printer should only be done by qualified
service personnel.
Connect the printer (and the UPS unit) to the electric outlet using a
power cord that is safety‐certified.
The electric outlet should be easily accessible, near the printer.
Never connect the power plug to an outlet that does not have a ground
(earth) wire, and never disconnect the ground. Doing so might expose
the operator to serious danger from electric shock.
FI: Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
NO: Apparatet må tilkoples jordet stikkontakt.
SE: Apparaten skall anslutas till jordat uttag.
Leave a minimum of 20 centimeters between ventilation openings and
walls or other objects.
The printer should only be operated by persons trained by a Stratasys
customer‐support representative.
All personnel operating or maintaining the printer should know the
location of first aid and emergency equipment and how to use it. Never
block access to this equipment.
Keep fingers and other body parts clear of the printer cover when
closing it.
Never attempt to open the printer cover while it is working.
Never override the interlock safety switch.
If the interlock safety switch ever fails, do not use the printer.
Several parts of the printer remain extremely hot even after it has
stopped operating. Avoid touching the UV lamp and the print block.
The UV lamp used in the printer emits dangerous radiation.
If the UV lamp remains on when the printer cover is open, do not stare
directly at the UV light. Shut down the printer and call your Stratasys
service provider.
Service operations should be performed only by qualified personnel
who have been instructed in relevant safety precautions.
Notify co‐workers and those who have access to the Objet system
before beginning non‐routine and hazardous work.
Report any potential dangers and safety-related accidents to your safety
officer or to other appropriate authorities.
DOC-34014 Rev. C