Printing the
Tray File
DOC-34014 Rev. C
When a tray is ready to be printed, it is placed in the Jobs Queue. When the
job reaches the head of the queue, Objet Studio pre‐processes the tray file to
create slices, and feeds them to the 3D printer.
To send the tray to the print queue:
1. On the Tray Settings ribbon, Build Process group, click
If the build tray file has not been saved, the Save As dialog box opens for
you to save it now.
Objet Studio checks if there is a problem with the positioning of objects
on the tray. If so, the affected objects are displayed with special colors
(see "Tray Validation" on page 42), and a warning message appears.
Figure 5-54: Tray validation warning message
To cancel the Build command so you can correct the problem, click
.
No
To print the models as they are positioned on the tray, click
The Job Manager screen opens, so you can monitor the progress of your
trays—before, during, and after printing. See "Monitoring and
Managing Print Jobs" on page 64.
Objet24 User Guide
.
.
Yes
5–39