Operating & Maintaining the Objet24 3D Printer
Starting the Objet24 Printer
6–2
Figure 6-1: The Objet24 3D Printer
CAUTION!
Do not attempt to operate the Objet printer before being trained by a
Stratasys customer-support representative.
Observe all safety warnings and follow the safety guidelines described
in chapter 2.
1. Turn on the main power switch, located at the back of the printer.
Figure 6-2: Main power switch and cable
The main power switch turns on the Objet printer, which includes —
the built‐in computer.
2. After the computer boots, open the Remote Desktop Connection on the
server ("host") computer, by double‐clicking the Printer computer
shortcut.
Printer cover
Printing-materials &
waste compartment
Printer stand
DOC-34014 Rev. C