Tray Perspective - Stratasys Objet24 User Manual

Using Objet Studio
Tray
Perspective
Tray Positioning To view the tray and models from different directions, you can move the
5–32
The default perspective of the build tray is "isometric." You can change the
perspective of the active window with one of ten options.
To change the perspective of the build tray in the active window:
1. On the Tray Settings ribbon, open the Perspective flyout toolbar.
Figure 5-41: Perspective flyout toolbar
2. Click the icon that represents the desired perspective.
tray around the screen and change its display angle.
To move the tray in the Objet Studio screen:
Press the mouse wheel while moving the mouse.
Figure 5-42: Tray after moving it in the Objet Studio display
DOC-34014 Rev. C