Table of Contents
Advertisement
Setting IPv4 Address
Setting IPv4 Address
1
Press
(
2
Use
/
to select <Network>, and press
●
When a message appears, press
3
Select <TCP/IP Settings>
4
Configure IP address settings.
<Auto>
Select to automatically assign an IP address via a protocol such as DHCP.
<Manual>
Select to configure the IP address settings by manually entering an IP address.
Automatically assigning an IP address
1
Select <Auto>, and press
2
Select <Protocol>, and press
3
Select <Use DHCP>, <Use BOOTP>, or <Use RARP>, and press
The machine's IPv4 address can be either assigned automatically by a dynamic IP
addressing protocol, such as DHCP, or entered manually. When connecting the
machine to a wired LAN, make sure that the connectors of the LAN cable are firmly
inserted into the ports (
).
.
<IPv4 Settings>
.
.
Network
Connecting to a Wired LAN(P. 188) ).
.
<IP Mode>.
191
.
0YSF-035
Advertisement
Table of Contents
