Table of Contents
Advertisement
User Settings N (N=1, 2, 3, 4, 5)
Specify the authentication password and encryption password as the user information used on SNMPv3. Use
the Remote UI to register the user information.
SNMP(P. 235)
Auth. Password /Encryption Password
Enter 6 to 16 alphanumeric characters for each password. Use the numeric keys to enter the password.
(
Settings>
user name
password
Rjct Packet in Sleep
Select whether to discard SNMP packets received during sleep mode.
Off
On
(
Packet in Sleep>
Reset(P. 498) )
●
If you select <On>, applications that use the SNMP protocol, such as Canon software imageWARE
Series, may be disabled to access the machine.
*
Spooler
Select whether to include the SD card in the storage locations of received print data. If you select <On>, the machine
capacity of receiving print data is increased.
Off
On
(
<On>
Setting Menu List
*
)
<Network>
Check the message
<SNMPv3 Settings>
<Auth. Password> or <Encryption Password>
Perform a hard reset (
)
<Network>
Check the message
<Off> or <On>
)
<Network>
Check the message
Perform a hard reset (
Monitoring and Controlling the Machine with
Select the user settings number
Performing a Hard Reset(P. 498) )
Perform a hard reset (
Performing a Hard Reset(P. 498) )
392
<SNMP
Enter the
<SNMP Settings>
Performing a Hard
<Spooler>
<Off> or
Check the
<Rjct
Advertisement
Table of Contents
