Initializing Menu
You can restore the settings of the machine (
Do not press the power switch when the initialization is in progress
●
If the machine is turned OFF during the initialization, it may be damaged.
If a Remote UI Access PIN has been specified
●
The Remote UI Access PIN is also initialized. After performing initialization, respecify a Remote UI Access
PIN.
Setting a Remote UI PIN(P. 266)
●
When you want to initialize the network settings, follow the procedure in
Settings(P. 602) .
●
When you want to initialize the settings in <Adj. Print Position>, follow the procedure in
Position(P. 420) .
(
Hard Reset(P. 498) )
Maintenance
Setup Menu(P. 363) ) to the factory default settings.
)
<Initialize Menu>
<Yes>
Perform a hard reset (
601
Initializing the Network
Adj. Print
Performing a
0YSF-07A