0FR4-0E5
Setting the IPv4 Address
Before setting the IP address, see
By default, the IPv4 address is obtained automatically.
Follow the steps in the procedure below to change the IP address setting.
1
Press [
] (Menu).
2
Select <Network Settings> using [
When the system manager ID and system manager PIN are specified
Use the numeric keys to enter the ID and number, and then press [
3
Select <TCP/IP Settings> using [
4
Select <IPv4 Settings> using [
"Attention (Setting the IPv4
] or [
], and then press [OK].
] or [
], and then press [OK].
] or [
], and then press [OK].
Address)."
] (Log In/Out).